Passive Oscilloscope Probes
Passive Oscilloscopes featuring Readout Actuators
The readout actuator pin prompts the automatic switching of the alphanumeric V/cm waveform scaling information on oscilloscopes with an on-screen display, or illuminates a x10 indicator on earlier RA capable oscilloscopes.
TEX200RA
$48.00
DC to 200MHz X10 Probe with Readout Actuator
The TEX200RA is a passive probe with a readout actuator integrated into the standard BNC connection.
This high impedance oscilloscope probe is designed and calibrated for use on instruments with an input impedance of 1 Mega-ohm shunted by 18 pF. However, the TEX200RA can be low-frequency adjusted to work with instruments having an input capacitance anywhere between 10 to 35 pF.
TEX500RA
$79.00
DC to 500MHz X10 Probe with Readout Actuator
The TEX500RA is a passive probe with a readout actuator integrated into the standard BNC connection.
This high impedance oscilloscope probe is designed and calibrated for use on instruments with an input impedance of 1 Mega-Ohm shunted by 15 pF. However, the TEX500RA can be low-frequency adjusted to work with instruments having an input capacitance anywhere between 10 to 35 pF.
High Voltage Oscilloscope Probes
TEX250HV
$59.00
DC to 250MHz X100 Higher Voltage Probe
The TEX250HV is a passive high voltage passive oscilloscope probe designed and calibrated for use on instruments with an input impedance of 1 Mega-Ohm shunted by 15 pF.
However, the TEX250HV can be low-frequency adjusted to work with instruments having an input capacitance anywhere between 10 to 50 pF.
This high voltage probe is designed for use by trained professionals.
TEX25A
$59.00
Automotive Ignition High Voltage Probe
The TEX25A offers the benefit of monitoring live electrical system performance using an indirect inductive capacitive connection that simply connects around the insulation of an ignition circuit component such as a plug wire.
HV potentials are accurately divided and can be displayed on your shop oscilloscope.
Suitable for use with conventional, HEI, and DIS ignition systems.
This high voltage probe is designed for use by trained professionals.
Test Leads and Cables
Oscilloscope Probe Accessories
TEX-BA
$6.00
The TEX-BA is a BNC to Probe Tip Adapter. This is especially useful when connecting your probes to test equipment measuring output. The connection snugly holds the probe and allows a stable measurement.
Many of our kits feature this accessory included with them, but if you need to replace existing or would like to purchase additional we have plenty in stock!
EZ-TWIST
$2.00
EZ-Twist Probe Tips for TEX-Series Probes.
The EZ-Twist Probe tip was used on many of our TEX-Series Oscilloscope probes several years ago.
To identify whether this is the right tip for you, carefully remove the old tip from your TEX series probe and compare it to the picture above.
Ez-Twist tips do not have a plastic shrouding around the threaded stub.
TEX-TIP
$2.00
Replacement Probe Tip for TEX-Series Probes
The TEX-TIP is a robust probe tip which is used on our current line of TEX-Series Oscilloscope Probes.
This new style is designed to be very durable and has a threaded plastic shroud.
To make sure you're getting the right probe tip for your TEX-Series probe, compare yours to the picture above.
TEX-GLC
$4.00
Probe Ground Lead Clip
The TEX-GLC is a Ground Lead Alligator Clip accessory. This allows technicians to make a common ground with equipment chassis while probing circuitry.
This accessory is commonly included with many of our oscilloscope probes, however if you need to replace existing or need more we've got plenty in stock!
TEX-HT
$4.00
Probe Hook Tip Adapter
The TEX-HT is a hook tip adapter accessory for oscilloscope probes. This is a must have for technicians by enabling precision measurements with your probes.
Most of our kits include one of these accessories, but if you need to replace existing or need more we've got plenty in stock!
TEX-PH
$18.00
Flexi-Stack Pincer Hook Pair
The Flexi-Stack Pincer Hook Pairs are a great addition to your lab precision test tools.
The plastic housing protects technicians from measured currents and simply pressing the button on the bottom reveals the precision hook tip.
Works with any double insulated banana style test lead; designed to complement our flexi-stack test lead pairs.
Kit includes one black colored and one red colored pincer hook.
Call us or shop in our online Store to Place your order!